From: Joe Martin (jmartin@capitalpremium.net)
Date: Tue Jan 14 2003 - 15:06:51 GMT-3
Anyone,
Can you verify or correct the following statements? I think this is how it
works with ATM (without CLIP). Please correct me if I am wrong.
If configuring a PVC I must map L3 address to VCD.
If configuring an SVC with ILMI, I must specify local ESI and map L3 address
to remote nsap address.
If configuring an SVC without ILMI, I must specify local nsap address and
map L3 address to remote nsap address.
TIA,
Joe Martin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Fabrice Bobes
Sent: Tuesday, January 14, 2003 9:46 AM
To: 'Hunt Lee'
Cc: ccielab@groupstudy.com
Subject: RE: Help Help!!! ATM question
Lee,
No, you don't need it.
This SVC configuration will work without ilmi:
Int ATM 2/0
Ip add 10.10.10.2 255.255.255.0
Pvc 0/5 qsaal
Atm nsap-address 47.009181000000123456789012.1414.1414.1414.00
Svc svc-1 nsap 47.009181000000123456789012.1313.1313.1313.00
Protocol ip 10.10.10.1 br
Regards,
Fabrice
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Hunt Lee
Sent: Monday, January 13, 2003 10:47 PM
To: 'ccielab@groupstudy.com'
Subject: Help Help!!! ATM question
For ATM SVCs (assuming I'm not using Classical IP), is it true that
regardless of whether I am using the ESI address OR NSAP address, I
still
need to enable ILMI by 'pvc 0/16 ilmi' command?
Regards,
Lee
-- WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company Level 1, 96 Lytton Road. Network Operations - Systems Engineer PO Box 4169, East Brisbane. email: huntl@webcentral.com.au Queensland, Australia. phone: +61 7 3249 2553 . . .
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:49 GMT-3