From: tsiartas@ameritech.net
Date: Mon Jan 13 2003 - 19:52:25 GMT-3
Here are some definitions,
Basically DNIS is the callED digits
ANI is the callING digits
Hope they help
ANI-Automatic number identification. SS7 (signaling system 7) feature in
which a series of digits, either analog or digital, are included in the
call, identifying the telephone number of the calling device. In other
words, ANI identifies the number of the calling party.
DNIS-Dialed number identification service, also known as the called
party number. The telephone number of the called party after translation
occurs in the Public Switched Telephone Network. A given destination may
have a different DNIS number based on how the call is placed (for
example, 800 or direct dial).
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tim Fletcher
Sent: Monday, January 13, 2003 11:09 AM
To: Rick; ccielab@groupstudy.com
Subject: Re: incoming calls through ISDN (VOIP gurus)
Rick,
I think you can also map all incoming voice calls with the "isdn
incoming-voice voice" command.
-Tim Fletcher
At 07:20 PM 1/12/2003 -0500, Rick wrote:
>Can anybody explain what DNIS in reference to incoming call through
ISDN?
>
>I'm I reading this correct, to say that all calls coming in VOIP
through a DDR
>ISDN interface must be mapped to POTS dial peer with the command
>incoming called-number 5671212 under the dial-peer voice 100 voip sub
mode.
>*it says for non-ISDN voice ports, a POTS dial peer is assigned as soon
as the
>voice port is seized, which is before the router can collect the digits
of the
>called the number.
>
>Also, says You can only select an inbound POTS dial peer based on the
called
>party number DNIS (I really wish I knew what DNIS means) when the call
>arrives.
>
>
>Thanks,
>Rick
>.
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:48 GMT-3