From: Peter van Oene (pvo@usermail.com)
Date: Sat Jan 11 2003 - 21:37:56 GMT-3
Actually to clarify, this issue might be resolvable depending on the
topology. However, in the below topology;
R1--EBGP---R2--R3--R4
Where R3 reflects to R4 and R2, using OSPF and BGP synch, learned routes
from R1 at R2 will not synch on R4.
If you have a way of fixing this that doesn't change IGP's or remove IBGP,
you'd be the first one to post one.
Pete
At 10:02 PM 1/11/2003 +0000, Jennifer Bellucci wrote:
>if ur able to paste sh ip bgp and config, I am sure we will be able to
>resolve the problem in a few mins.
>
>Jbell
>----- Original Message -----
>From: "Peter van Oene" <pvo@usermail.com>
>To: <ccielab@groupstudy.com>
>Sent: Saturday, January 11, 2003 7:26 PM
>Subject: Re: BGP sync with Route Reflector
>
>
> > >R1 originates network 200.1.1.0, when I injected into OSPF on R2, This
> > >routes will be reflected to R4 by R3, the problem is, in R4 200.1.1.0 is
> > >not marked as best-path, so R5 doesnt get that routes from R4
> > >I didn;t see "not syncronized" on R4, I just saw "no best path"
> >
> > You can't fix this problem. Sync and route reflection are not designed to
> > work together.
> >
> >
> > >I have already set ospf-ID same with bgp router ID, so what is suspected
> > >problem ??
> > >and how to solve this problem ??
> > >
> > >thx
> > >
> > >
> > >Ali
> >
> >===========================================================================
>================
> > >Meriahkan Hari Valentine Anda dan Ikuti Lomba Desain Kartu Eletronik
> > >dengan Tema Valentine
> > >Ikuti Polling Pemilihan Pemenang Lomba Desain Kartu Elektronik Natal dan
> > >Tahun Baru 2003 di http://kartu.plasa.com/lomba
> > >KSI PlasaCom - Reuni Alumni STTTelkom
> > >http://www.plasa.com/belajar/reuni.html
> >
> >===========================================================================
>================
> > >.
> > .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3