From: Tasuka Amano Hsu (tasuka@mac.com)
Date: Sun Jan 12 2003 - 22:46:34 GMT-3
How about change the R2/R3/R4 to BGP confederation, so the R2/R3 and r4
is in different AS ( but look same AS from outside the confederation AS)
and that make you connect to R2/R3/R4 as eBGP inside the AS200, but
outside see them as one AS.
On Saturday, Jan 11, 2003, at 13:30 Asia/Taipei, Ali Fahmi wrote:
> Hi all, I have network topology like this
>
>
> R1
> | BGP 100
> | =======================================
> R2 ------------------------R3 (RR)
> |
> | BGP 200
> R4-------------------------- OSPF |
> | =======================================
> R5 BGP 300
>
>
>
>
> R3 use Frame Relay multipoint interface to R2 and R4
>
>
> Syncronization is enabled in all routers
>
> R1 originates network 200.1.1.0, when I injected into OSPF on R2,
> This routes will be reflected to R4 by R3, the problem is, in R4
> 200.1.1.0 is not marked as best-path, so R5 doesnt get that routes
> from R4
> I didn;t see "not syncronized" on R4, I just saw "no best path"
>
> I have already set ospf-ID same with bgp router ID, so what is
> suspected problem ??
> and how to solve this problem ??
>
> thx
>
>
> Ali
> =======================================================================
> ====================
> Meriahkan Hari Valentine Anda dan Ikuti Lomba Desain Kartu Eletronik
> dengan Tema Valentine
> Ikuti Polling Pemilihan Pemenang Lomba Desain Kartu Elektronik Natal
> dan Tahun Baru 2003 di http://kartu.plasa.com/lomba
> KSI PlasaCom - Reuni Alumni STTTelkom
> http://www.plasa.com/belajar/reuni.html
> =======================================================================
> ====================
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3