From: Aidan Marks (amarks@cisco.com)
Date: Thu Jan 09 2003 - 17:32:38 GMT-3
This is correct, there is no way right now to change the AD of selected
eigrp external routes, it's all or nothing with the distance eigrp x x
command.
Therefore doing something like "distance 170 10.20.30.40 0.0.0.0 100" won't
work for externals as it applies only to internal routes.
Aidan
At 06:14 AM 10/01/2003, Desmond wrote:
>The distance command only work for routes "D", not "D EX".
>
>----- Original Message -----
>From: "Joe Chang" <changjoe@earthlink.net>
>To: <ccielab@groupstudy.com>
>Sent: Thursday, January 09, 2003 11:59 AM
>Subject: Re: changing AD for EIGRP External Route (D EX)
>
>
> > Hmm, route tagging wouldn't work, the "distance" command doesn't allow for
> > matching tags, and policy routing doesn't allow for setting AD.
> >
> > Your'e best bet is to set the distance command for the specific routes.
> >
> > ----- Original Message -----
> > From: "Desmond" <cciestudy@sympatico.ca>
> > To: <ccielab@groupstudy.com>
> > Sent: Thursday, January 09, 2003 12:45 PM
> > Subject: Re: changing AD for EIGRP External Route (D EX)
> >
> >
> > > Sorry, I missed something.
> > >
> > > I meant from particular source.
> > >
> > > ----- Original Message -----
> > > From: "Desmond" <cciestudy@sympatico.ca>
> > > To: <ccielab@groupstudy.com>
> > > Sent: Thursday, January 09, 2003 11:37 AM
> > > Subject: changing AD for EIGRP External Route (D EX)
> > >
> > >
> > > > Is there any way to change the admin distance for EIGRP D EX routes ?
> > > >
> > > >
> > > > Thanks
> > > >
> > > > Desmond
> > > > .
> > > .
> > .
>.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3