From: Joe Martin (jmartin@capitalpremium.net)
Date: Thu Jan 09 2003 - 17:29:34 GMT-3
use "distance eigrp" command under eigrp process. You have the option of
specifying internal (D) or external (D EX) routes.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Desmond
Sent: Thursday, January 09, 2003 12:14 PM
To: Joe Chang; ccielab@groupstudy.com
Subject: Re: changing AD for EIGRP External Route (D EX)
The distance command only work for routes "D", not "D EX".
----- Original Message -----
From: "Joe Chang" <changjoe@earthlink.net>
To: <ccielab@groupstudy.com>
Sent: Thursday, January 09, 2003 11:59 AM
Subject: Re: changing AD for EIGRP External Route (D EX)
> Hmm, route tagging wouldn't work, the "distance" command doesn't allow for
> matching tags, and policy routing doesn't allow for setting AD.
>
> Your'e best bet is to set the distance command for the specific routes.
>
> ----- Original Message -----
> From: "Desmond" <cciestudy@sympatico.ca>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, January 09, 2003 12:45 PM
> Subject: Re: changing AD for EIGRP External Route (D EX)
>
>
> > Sorry, I missed something.
> >
> > I meant from particular source.
> >
> > ----- Original Message -----
> > From: "Desmond" <cciestudy@sympatico.ca>
> > To: <ccielab@groupstudy.com>
> > Sent: Thursday, January 09, 2003 11:37 AM
> > Subject: changing AD for EIGRP External Route (D EX)
> >
> >
> > > Is there any way to change the admin distance for EIGRP D EX routes ?
> > >
> > >
> > > Thanks
> > >
> > > Desmond
> > > .
> > .
> .
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3