From: Aidan Marks (amarks@cisco.com)
Date: Thu Jan 09 2003 - 17:24:03 GMT-3
I believe your map-list needs to refer to the VCD not the VCI.
At 06:55 AM 10/01/2003, Jason Cash wrote:
>Well, I just entered the following 'framing cbitplcp' under the ATM
>interfaceds on the LS1010 and the interfaces came up! I was dealing
>with DS3 coaxial cable...don't know if that was an important detail but
>now all is up and I am just having a problem pinging across...
>
>On the routers the syntax is for the map-list is 'ip ADD atm-vc PVC #'.
>Well what is the PCV #? Is it the VCD, the VPI or the VCI? I think
>that is my problem with the ping.
>
>
>The configs follow:
>
>LS1010
>interface ATM0/0/0
> no ip address
> no ip directed-broadcast
> logging event subif-link-status
> no atm ilmi-keepalive
> framing cbitplcp
>!
>interface ATM0/0/1
> no ip address
> no ip directed-broadcast
> logging event subif-link-status
> no atm ilmi-keepalive
> atm pvc 0 33 interface ATM0/0/0 0 32
> framing cbitplcp
>
>7505
>interface ATM0/0
> ip address 200.1.1.8 255.255.255.0
> map-group test
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 32 aal5snap
> no atm ilmi-keepalive
>
>map-list test
> ip 200.1.1.7 atm-vc 32 broadcast
>
>R4.7507#sh atm pvc
> VCD / Peak Avg/Min
>Interface Name VPI VCI Type Encaps SC Kbps Kbps Sts
>0/0 1 0 5 PVC SAAL UBR 45000 UP
>0/0 2 0 32 PVC SNAP UBR 45000 UP
>
>R4.7507#sh atm map
>Map list test : PERMANENT
>ip 200.1.1.7 maps to VC 32
> , broadcast
>
>
>7000
>interface ATM4/0
> ip address 200.1.1.7 255.255.255.0
> no ip directed-broadcast
> atm pvc 1 0 5 qsaal
> atm pvc 2 0 33 aal5snap
> map-group test
>
>map-list test
> ip 200.1.1.8 atm-vc 33 broadcast
>
>7010#sh atm vc
> AAL / Peak Avg. Burst
>
>Interface VCD VPI VCI Type Encapsulation Kbps Kbps Cells
>Status
>4/0 1 0 5 PVC AAL5-SAAL 45000 45000 96
>ACTIVE
>4/0 2 0 33 PVC AAL5-SNAP 45000 45000 96
>ACTIVE
>
>
>7010#sh atm map
>%SYS-5-CONFIG_I: Configured from console by console
>Map list test : PERMANENT
>ip 200.1.1.8 maps to VC 33
> , broadcast
>
>
>DEBUG output from ping [7000]:
>
>7010#deb ip pack
>IP packet debugging is on
>7010#ping 200.1.1.8
>
>Type escape sequence to abort.
>Sending 5, 100-byte ICMP Echos to 200.1.1.8, timeout is 2 seconds:
>
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
>failed.
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
>failed.
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
>failed.
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
>IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
>failed..
>Success rate is 0 percent (0/5)
>
>
>
>-----Original Message-----
>From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
>Sent: Thursday, January 09, 2003 11:34 AM
>To: Jason Cash
>Subject: Re: ATM pvc config w/LS1010
>
>Are your ATM interfaces OC3MM? I am curious why the cell rate is only
>45000. Maybe there is something funcky on the ls1010. All the more
>reason
>to clear the config and start fresh.
>
>
>
>Tony Schaffran
>Network Analyst
>CCNP, CCNA, CCDA,
>NNCSS, NNCDS, CNE, MCSE
>
>www.cconlinelabs.com
>"Your #1 choice for Cisco rack rentals."
>
>
>----- Original Message -----
>From: "Jason Cash" <cash2001@swbell.net>
>To: "'Tony Schaffran'" <tschaffran@cconlinelabs.com>
>Sent: Thursday, January 09, 2003 9:20 AM
>Subject: RE: ATM pvc config w/LS1010
>
>
> > What config is necessary on the LS1010?
> >
> > -----Original Message-----
> > From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
> > Sent: Thursday, January 09, 2003 11:04 AM
> > To: Jason Cash
> > Subject: Re: ATM pvc config w/LS1010
> >
> > It looks like you have a problem with you connection between your
>ls1010
> > and
> > your 7010.
> >
> >
> >
> > Tony Schaffran
> > Network Analyst
> > CCNP, CCNA, CCDA,
> > NNCSS, NNCDS, CNE, MCSE
> >
> > www.cconlinelabs.com
> > "Your #1 choice for Cisco rack rentals."
> >
> >
> > ----- Original Message -----
> > From: "Jason Cash" <cash2001@swbell.net>
> > To: <ccielab@groupstudy.com>; <tschaffran@cconlinelabs.com>
> > Sent: Thursday, January 09, 2003 9:00 AM
> > Subject: FW: ATM pvc config w/LS1010
> >
> >
> > >
> > > Here is the LS1010 info
> > >
> > > LS1010#sh atm vc
> > > Interface VPI VCI Type X-Interface X-VPI X-VCI Encap
> > Status
> > > ATM0/0/0 0 5 PVC ATM2/0/0 0 43 QSAAL
>DOWN
> > > ATM0/0/0 0 16 PVC ATM2/0/0 0 35 ILMI
>DOWN
> > > ATM0/0/0 0 32 PVC ATM0/0/1 0 33
>DOWN
> > > ATM0/0/1 0 5 PVC ATM2/0/0 0 44 QSAAL
>DOWN
> > > ATM0/0/1 0 16 PVC ATM2/0/0 0 36 ILMI
>DOWN
> > > ATM0/0/1 0 33 PVC ATM0/0/0 0 32
>DOWN
> > >
> > > interface ATM0/0/0
> > > no ip address
> > > no ip directed-broadcast
> > > logging event subif-link-status
> > > no atm ilmi-keepalive
> > > !
> > > interface ATM0/0/1
> > > no ip address
> > > no ip directed-broadcast
> > > logging event subif-link-status
> > > no atm ilmi-keepalive
> > > atm pvc 0 33 interface ATM0/0/0 0 32
> > >
> > > 7505
> > > interface ATM0/0
> > > ip address 200.1.1.8 255.255.255.0
> > > map-group test
> > > atm pvc 1 0 5 qsaal
> > > atm pvc 2 0 32 aal5snap
> > > no atm ilmi-keepalive
> > >
> > > R4.7507#sh atm vc
> > > VCD / Peak Avg/Min
> > > Burst
> > > Interface Name VPI VCI Type Encaps SC Kbps Kbps
> > > Sts
> > > 0/0 1 0 5 PVC SAAL UBR 45000
> > > UP
> > > 0/0 2 0 32 PVC SNAP UBR 45000
> > > UP
> > >
> > >
> > > 7000
> > > interface ATM4/0
> > > ip address 200.1.1.7 255.255.255.0
> > > no ip directed-broadcast
> > > atm pvc 1 0 5 qsaal
> > > atm pvc 2 0 33 aal5snap
> > > map-group test
> > >
> > > 7010#sh atm vc
> > > AAL / Peak Avg.
>Burst
> > >
> > > Interface VCD VPI VCI Type Encapsulation Kbps Kbps
>Cells
> > > Status
> > > 4/0 1 0 5 PVC AAL5-SAAL 45000 45000
>96
> > > ACTIVE
> > > 4/0 2 0 33 PVC AAL5-SNAP 45000 45000
>96
> > > ACTIVE
> > >
> > > Thanks again!
>.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3