From: Jason Cash (cash2001@swbell.net)
Date: Thu Jan 09 2003 - 16:55:01 GMT-3
Well, I just entered the following 'framing cbitplcp' under the ATM
interfaceds on the LS1010 and the interfaces came up! I was dealing
with DS3 coaxial cable...don't know if that was an important detail but
now all is up and I am just having a problem pinging across...
On the routers the syntax is for the map-list is 'ip ADD atm-vc PVC #'.
Well what is the PCV #? Is it the VCD, the VPI or the VCI? I think
that is my problem with the ping.
The configs follow:
LS1010
interface ATM0/0/0
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm ilmi-keepalive
framing cbitplcp
!
interface ATM0/0/1
no ip address
no ip directed-broadcast
logging event subif-link-status
no atm ilmi-keepalive
atm pvc 0 33 interface ATM0/0/0 0 32
framing cbitplcp
7505
interface ATM0/0
ip address 200.1.1.8 255.255.255.0
map-group test
atm pvc 1 0 5 qsaal
atm pvc 2 0 32 aal5snap
no atm ilmi-keepalive
map-list test
ip 200.1.1.7 atm-vc 32 broadcast
R4.7507#sh atm pvc
VCD / Peak Avg/Min
Interface Name VPI VCI Type Encaps SC Kbps Kbps Sts
0/0 1 0 5 PVC SAAL UBR 45000 UP
0/0 2 0 32 PVC SNAP UBR 45000 UP
R4.7507#sh atm map
Map list test : PERMANENT
ip 200.1.1.7 maps to VC 32
, broadcast
7000
interface ATM4/0
ip address 200.1.1.7 255.255.255.0
no ip directed-broadcast
atm pvc 1 0 5 qsaal
atm pvc 2 0 33 aal5snap
map-group test
map-list test
ip 200.1.1.8 atm-vc 33 broadcast
7010#sh atm vc
AAL / Peak Avg. Burst
Interface VCD VPI VCI Type Encapsulation Kbps Kbps Cells
Status
4/0 1 0 5 PVC AAL5-SAAL 45000 45000 96
ACTIVE
4/0 2 0 33 PVC AAL5-SNAP 45000 45000 96
ACTIVE
7010#sh atm map
%SYS-5-CONFIG_I: Configured from console by console
Map list test : PERMANENT
ip 200.1.1.8 maps to VC 33
, broadcast
DEBUG output from ping [7000]:
7010#deb ip pack
IP packet debugging is on
7010#ping 200.1.1.8
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 200.1.1.8, timeout is 2 seconds:
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
failed.
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
failed.
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
failed.
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, sending
IP: s=200.1.1.7 (local), d=200.1.1.8 (ATM4/0), len 100, encapsulation
failed..
Success rate is 0 percent (0/5)
-----Original Message-----
From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
Sent: Thursday, January 09, 2003 11:34 AM
To: Jason Cash
Subject: Re: ATM pvc config w/LS1010
Are your ATM interfaces OC3MM? I am curious why the cell rate is only
45000. Maybe there is something funcky on the ls1010. All the more
reason
to clear the config and start fresh.
Tony Schaffran
Network Analyst
CCNP, CCNA, CCDA,
NNCSS, NNCDS, CNE, MCSE
www.cconlinelabs.com
"Your #1 choice for Cisco rack rentals."
----- Original Message -----
From: "Jason Cash" <cash2001@swbell.net>
To: "'Tony Schaffran'" <tschaffran@cconlinelabs.com>
Sent: Thursday, January 09, 2003 9:20 AM
Subject: RE: ATM pvc config w/LS1010
> What config is necessary on the LS1010?
>
> -----Original Message-----
> From: Tony Schaffran [mailto:tschaffran@cconlinelabs.com]
> Sent: Thursday, January 09, 2003 11:04 AM
> To: Jason Cash
> Subject: Re: ATM pvc config w/LS1010
>
> It looks like you have a problem with you connection between your
ls1010
> and
> your 7010.
>
>
>
> Tony Schaffran
> Network Analyst
> CCNP, CCNA, CCDA,
> NNCSS, NNCDS, CNE, MCSE
>
> www.cconlinelabs.com
> "Your #1 choice for Cisco rack rentals."
>
>
> ----- Original Message -----
> From: "Jason Cash" <cash2001@swbell.net>
> To: <ccielab@groupstudy.com>; <tschaffran@cconlinelabs.com>
> Sent: Thursday, January 09, 2003 9:00 AM
> Subject: FW: ATM pvc config w/LS1010
>
>
> >
> > Here is the LS1010 info
> >
> > LS1010#sh atm vc
> > Interface VPI VCI Type X-Interface X-VPI X-VCI Encap
> Status
> > ATM0/0/0 0 5 PVC ATM2/0/0 0 43 QSAAL
DOWN
> > ATM0/0/0 0 16 PVC ATM2/0/0 0 35 ILMI
DOWN
> > ATM0/0/0 0 32 PVC ATM0/0/1 0 33
DOWN
> > ATM0/0/1 0 5 PVC ATM2/0/0 0 44 QSAAL
DOWN
> > ATM0/0/1 0 16 PVC ATM2/0/0 0 36 ILMI
DOWN
> > ATM0/0/1 0 33 PVC ATM0/0/0 0 32
DOWN
> >
> > interface ATM0/0/0
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > no atm ilmi-keepalive
> > !
> > interface ATM0/0/1
> > no ip address
> > no ip directed-broadcast
> > logging event subif-link-status
> > no atm ilmi-keepalive
> > atm pvc 0 33 interface ATM0/0/0 0 32
> >
> > 7505
> > interface ATM0/0
> > ip address 200.1.1.8 255.255.255.0
> > map-group test
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 32 aal5snap
> > no atm ilmi-keepalive
> >
> > R4.7507#sh atm vc
> > VCD / Peak Avg/Min
> > Burst
> > Interface Name VPI VCI Type Encaps SC Kbps Kbps
> > Sts
> > 0/0 1 0 5 PVC SAAL UBR 45000
> > UP
> > 0/0 2 0 32 PVC SNAP UBR 45000
> > UP
> >
> >
> > 7000
> > interface ATM4/0
> > ip address 200.1.1.7 255.255.255.0
> > no ip directed-broadcast
> > atm pvc 1 0 5 qsaal
> > atm pvc 2 0 33 aal5snap
> > map-group test
> >
> > 7010#sh atm vc
> > AAL / Peak Avg.
Burst
> >
> > Interface VCD VPI VCI Type Encapsulation Kbps Kbps
Cells
> > Status
> > 4/0 1 0 5 PVC AAL5-SAAL 45000 45000
96
> > ACTIVE
> > 4/0 2 0 33 PVC AAL5-SNAP 45000 45000
96
> > ACTIVE
> >
> > Thanks again!
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:46 GMT-3