From: Evgeny Tantsura (ivgen@castel.nl)
Date: Mon Jan 06 2003 - 07:02:42 GMT-3
router config
area <area #> authentication - clear text
area <area #> authentication message-digest - md5
interface config
ip ospf authentication-key <password>
> Hi, can somebody help me on this?
>
> area1
> (area 0) R4 <=====================> R11 (area 2)
> OSPF authentication
>
> The link between R4 and R11 is in OSPF area1. area1 also is virtual-link
> for area2. If I put OSPF authentication in area1. Then I have to enable
> OSPF authentication for the virtual-link. Further, I have to put area 0 in
> OSPF authentication.
> My question is how to use different authentication key and methord for
> those three authentication?
> like: MD5 and key1 for area 1. clear text and key2 for virtual-link. MD5
> with key2 for area 0.
>
> _________________________________________________________________
> OmSCJ@=gIOWn4s5D5gWSSJ<~O5M3!* MSN Hotmail!# http://www.hotmail.com
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:42 GMT-3