Re: VoIP: basic config help

From: stefan vogt (stefan-uwe_vogt@web.de)
Date: Sun Jan 05 2003 - 07:07:35 GMT-3

• Next message: Carlos: "Re: BGP and RIP route"
• Previous message: Sage Vadi: "VoIP: basic config help (added serial)"
• Maybe in reply to: Sage Vadi: "VoIP: basic config help"
• Next in thread: Evgeny Tantsura: "Re: VoIP: basic config help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Sage,

>Q) Is it possible to configure VoIP via ethernet ports?
Yes, if IP configured and connectivity is ok. The name implies that it should work over every ip capable link.

Can you provide your configs?

-Stefan

=?iso-8859-1?q?Sage=20Vadi?= <sagevadi@yahoo.co.uk> schrieb am 05.01.03 09:19:38:
> Hi all,
>
> Q) Is it possible to configure VoIP via ethernet
> ports?
>
> I ask this because the basic config examples on CCO do
> not seem to be via ethernet, but via frame.
>
> I have 2 routers, connected via ethernet. I can dial
> and here dial-tone, but the phones do not ring.
>
> Using FXS modules on a 2600.
>
> Cheers,
> Sage
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
> .

• Next message: Carlos: "Re: BGP and RIP route"
• Previous message: Sage Vadi: "VoIP: basic config help (added serial)"
• Maybe in reply to: Sage Vadi: "VoIP: basic config help"
• Next in thread: Evgeny Tantsura: "Re: VoIP: basic config help"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:42 GMT-3