From: Tony Schaffran (tschaffran@cconlinelabs.com)
Date: Sat Jan 04 2003 - 15:51:49 GMT-3
Don't you need the string in your dialer map?
Tony Schaffran
Network Analyst
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
CCOnlineLabs.com
http://www.cconlinelabs.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Peng Zheng
Sent: Saturday, January 04, 2003 10:21 AM
To: ccielab@groupstudy.com
Subject: ISDN dialer map
Hi,
I config ISDN between r5 and r6, my config on r6 is:
interface BRI0
ip address 192.158.254.14 255.255.255.252
encapsulation ppp
dialer map ip 192.158.254.13 name r5
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40822222221 4082222222
isdn spid2 40822222222 4082222222
on r5:
interface BRI0
ip address 192.158.254.13 255.255.255.252
encapsulation ppp
dialer map ip 192.158.254.14 name r6 broadcast
4082222222
dialer-group 1
isdn switch-type basic-ni
isdn spid1 40811111111 4081111111
isdn spid2 40811111112 4081111111
ping is not successful when I ping r6 from r5.
If I change "dialer map" command on r6 to
dialer map ip 192.158.254.13 name r5 (broadcast)
,ping is successful.
What's the problem?
Thanks for help.
Best Wishes,
Peng Zheng
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3