ISDN dialer map

From: Peng Zheng (zpnist@yahoo.com)
Date: Sat Jan 04 2003 - 15:21:04 GMT-3

• Next message: Cameron, John: "EIGRP & Spilt horizon"
• Previous message: Matthew Poole: "Re: A Frame Relay router cannot ping itself?"
• Next in thread: Tony Schaffran: "RE: ISDN dialer map"
• Maybe reply: Tony Schaffran: "RE: ISDN dialer map"
• Maybe reply: Peng Zheng: "Re: ISDN dialer map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

I config ISDN between r5 and r6, my config on r6 is:

interface BRI0
 ip address 192.158.254.14 255.255.255.252
 encapsulation ppp
 dialer map ip 192.158.254.13 name r5
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 40822222221 4082222222
 isdn spid2 40822222222 4082222222

on r5:

interface BRI0
 ip address 192.158.254.13 255.255.255.252
 encapsulation ppp
 dialer map ip 192.158.254.14 name r6 broadcast
4082222222
 dialer-group 1
 isdn switch-type basic-ni
 isdn spid1 40811111111 4081111111
 isdn spid2 40811111112 4081111111

ping is not successful when I ping r6 from r5.

If I change "dialer map" command on r6 to

dialer map ip 192.158.254.13 name r5 (broadcast)
,ping is successful.

What's the problem?

Thanks for help.

Best Wishes,
Peng Zheng

• Next message: Cameron, John: "EIGRP & Spilt horizon"
• Previous message: Matthew Poole: "Re: A Frame Relay router cannot ping itself?"
• Next in thread: Tony Schaffran: "RE: ISDN dialer map"
• Maybe reply: Tony Schaffran: "RE: ISDN dialer map"
• Maybe reply: Peng Zheng: "Re: ISDN dialer map"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:41 GMT-3