From: Frank Jimenez (franjime@cisco.com)
Date: Thu Jan 02 2003 - 01:57:52 GMT-3
Fallback Bridging:
Remember - Must have the EMI version of code on the 3550
For details:
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configura
tion_guide_chapter09186a008007f3ac.html
Note that 'bridge IRB' isn't a supported command on the 3550.
More unsupported commands:
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configura
tion_guide_chapter09186a008007e773.html
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Janto Cin
Sent: Wednesday, January 01, 2003 9:44 PM
To: ccielab@groupstudy.com
Subject: Repost: Please help on Cat3550 fallback bridging
Dear All,
R1--------Cat3550--------R2
-configure R1 and R2 in same vlan (12)
-configure vlan 12 in subnet 150.50.12.0/24, cat3550 IP=150.50.12.35/24
-non-ip traffic will be bridged on vlan 12, and ip traffic will be
routed
Do we need to configure IRB on cat3550? Or just like below:
Cat3550
------------
Bridge 56 protocol vlan bridge
Int vlan 56
Ip add 150.50.12.35 255.255.255.0
Bridge-group 56
Thank you in advance.
Kind Regards,
Janto
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:38 GMT-3