From: eric (namaste@pacbell.net)
Date: Thu Jan 02 2003 - 00:18:00 GMT-3
Thanks Joe,
you got me to look at it a little closer I just need to understand it better
especially when running a routing protocol on a 3550.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Joe Chang
Sent: Wednesday, January 01, 2003 4:25 PM
To: ccie
Subject: Re: eigrp summary-address
Could you show us the routing table for the router on one of the OSPF
routers? When "ip eigrp summary" is configured the summarized routes will
not be advertised in EIGRP updates out that interface. Auto-summary is
relevant only when you have EIGRP peers on subnets that are not of the same
major IP as the route you are trying to advertise (in your case the
150.50.0.0 interfaces).
----- Original Message -----
From: "eric" <namaste@pacbell.net>
To: "ccie" <ccielab@groupstudy.com>
Sent: Wednesday, January 01, 2003 8:11 PM
Subject: eigrp summary-address
> Hey guys,
> I need some clarity on summarizing routes in eigrp.
> I have these networks which I am summarazing
> 160.60.60.1/27
> 160.60.60.33/27
> 160.60.60.65/27
> 160.60.60.97/27
>
> summary statement below
> interface Vlan3
> ip address 150.50.3.8 255.255.255.0
> ip summary-address eigrp 34 160.60.60.0 255.255.255.0 5
>
> The routing proces output
>
> router eigrp 34
> passive-interface default
> no passive-interface Vlan3
> no passive-interface Vlan8
> no passive-interface Vlan45
> network 150.50.3.0 0.0.0.255
> network 150.50.0.0
> network 160.60.60.0 0.0.0.255
> no auto-summary
> no eigrp log-neighbor-changes
>
> In the ospf routers that I am redist. eigrp into I see the summary routes
> and the more specific
> If I turn off auto-summary only the summary gets advertized.
>
> I am wondering is this the only way to get the summary out without the
more
> specific networks.
>
> thanks.
> .
.
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:38 GMT-3