From: Joe Chang (changjoe@earthlink.net)
Date: Wed Jan 01 2003 - 23:56:24 GMT-3
No prob!
----- Original Message -----
From: "eric" <namaste@pacbell.net>
To: "Joe Chang" <changjoe@earthlink.net>; "ccie" <ccielab@groupstudy.com>
Sent: Wednesday, January 01, 2003 11:18 PM
Subject: RE: eigrp summary-address
> Thanks Joe,
> you got me to look at it a little closer I just need to understand it
better
> especially when running a routing protocol on a 3550.
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Joe Chang
> Sent: Wednesday, January 01, 2003 4:25 PM
> To: ccie
> Subject: Re: eigrp summary-address
>
>
> Could you show us the routing table for the router on one of the OSPF
> routers? When "ip eigrp summary" is configured the summarized routes will
> not be advertised in EIGRP updates out that interface. Auto-summary is
> relevant only when you have EIGRP peers on subnets that are not of the
same
> major IP as the route you are trying to advertise (in your case the
> 150.50.0.0 interfaces).
>
>
> ----- Original Message -----
> From: "eric" <namaste@pacbell.net>
> To: "ccie" <ccielab@groupstudy.com>
> Sent: Wednesday, January 01, 2003 8:11 PM
> Subject: eigrp summary-address
>
>
> > Hey guys,
> > I need some clarity on summarizing routes in eigrp.
> > I have these networks which I am summarazing
> > 160.60.60.1/27
> > 160.60.60.33/27
> > 160.60.60.65/27
> > 160.60.60.97/27
> >
> > summary statement below
> > interface Vlan3
> > ip address 150.50.3.8 255.255.255.0
> > ip summary-address eigrp 34 160.60.60.0 255.255.255.0 5
> >
> > The routing proces output
> >
> > router eigrp 34
> > passive-interface default
> > no passive-interface Vlan3
> > no passive-interface Vlan8
> > no passive-interface Vlan45
> > network 150.50.3.0 0.0.0.255
> > network 150.50.0.0
> > network 160.60.60.0 0.0.0.255
> > no auto-summary
> > no eigrp log-neighbor-changes
> >
> > In the ospf routers that I am redist. eigrp into I see the summary
routes
> > and the more specific
> > If I turn off auto-summary only the summary gets advertized.
> >
> > I am wondering is this the only way to get the summary out without the
> more
> > specific networks.
> >
> > thanks.
> > .
> .
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:38 GMT-3