From: Sundar Palaniappan (sundar_palaniappan@hotmail.com)
Date: Wed Jan 01 2003 - 21:42:44 GMT-3
When redistributing from another protocol into OSPF, "summary address"
command is recommended for summarizing redistributed routes. You need to
configure this on the ASBR.
>From: eric <namaste@pacbell.net>
>Reply-To: eric <namaste@pacbell.net>
>To: ccie <ccielab@groupstudy.com>
>Subject: eigrp summary-address
>Date: Wed, 01 Jan 2003 16:11:08 -0800
>
>Hey guys,
>I need some clarity on summarizing routes in eigrp.
>I have these networks which I am summarazing
>160.60.60.1/27
>160.60.60.33/27
>160.60.60.65/27
>160.60.60.97/27
>
>summary statement below
>interface Vlan3
> ip address 150.50.3.8 255.255.255.0
> ip summary-address eigrp 34 160.60.60.0 255.255.255.0 5
>
>The routing proces output
>
>router eigrp 34
> passive-interface default
> no passive-interface Vlan3
> no passive-interface Vlan8
> no passive-interface Vlan45
> network 150.50.3.0 0.0.0.255
> network 150.50.0.0
> network 160.60.60.0 0.0.0.255
> no auto-summary
> no eigrp log-neighbor-changes
>
>In the ospf routers that I am redist. eigrp into I see the summary routes
>and the more specific
>If I turn off auto-summary only the summary gets advertized.
>
>I am wondering is this the only way to get the summary out without the more
>specific networks.
>
>thanks.
>.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:38 GMT-3