From: Joe Chang (changjoe@earthlink.net)
Date: Tue Dec 31 2002 - 19:28:45 GMT-3
Hi Liban,
I have some questions about your situation:
When you are say you are running from a loopback, do you mean you have
configured "ip unnumbered" on the multilink virtual interface?
Are you saying that you are successfully bundling 8 T1 serial interfaces
even though you know the limit is supposed to be 6 ? If possible, can you
show us a link to a document that specifies the 6 T1 limitation ?
Are you saying that although bundling 8 T1's does work, you are getting
packet drops?
If that is the problem, could you show us the results from "show ip ppp
multilink" on your router?
----- Original Message -----
From: <Liban.Mohamed@mail.sprint.com>
To: <ccielab@groupstudy.com>; <Liban.Mohamed@mail.sprint.com>
Sent: Tuesday, December 31, 2002 3:12 PM
Subject: RE: ppp multilink question
> I am reposting this question..
>
>
>
>
> -----Original Message-----
> From: Liban.Mohamed [mailto:Liban.Mohamed@mail.sprint.com]
> Sent: Monday, December 23, 2002 5:27 PM
> To: ccielab
> Subject: ppp multilink question
>
>
> Hello gang,
>
> I have customer that has 8 T-1 and bundled to ppp multilink. Now I know
> if you running from a loopback. you can only have 6 T-1's. Is that goes
> to ppp multilink since it's bundled to that interface. or It should
> work, because I am seeing packet drop when I turn the BGP. If I change
> to static everything works fine.
>
> any suggestion....
>
>
>
>
> Thanks.
> .
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:55 GMT-3