From: Scott Morris (swm@emanon.com)
Date: Sat Dec 28 2002 - 12:11:48 GMT-3
If you're using priority, you'll also have 1981, 1982 and 1983 as
destination ports. And I think there's something about udp connections
as well, though I don't have a list of ports for that (dlsw udp-disable
turns off as I recall).
HTH,
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jay Greenberg
Sent: Saturday, December 28, 2002 12:38 AM
To: ccielab@groupstudy.com
Subject: Filtering DLSw+ TCP Session
Any idea how to explicitly allow a DSLw+ TCP session through an ACL? On
a recent practice lab, I used:
permit tcp any any eq 2065
permit tcp any any ge 11000
which worked, however I wonder if there is a more practical / direct way
of doing this. .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:54 GMT-3