From: Tran Tien Phong (PhongTT2@FPT.COM.VN)
Date: Fri Dec 27 2002 - 09:36:58 GMT-3
Hi Desmond,
I think you should add the command "dialer callback-server username"
under the "map-class dialer r7r2" section in R7 configs.
I have tried your configs in my lab with above changes and it worked
well.
Let me know how it work in your lab,
Thanks,
Tran Tien Phong
-----Original Message-----
From: Dang Quang Minh [mailto:minhdq@saigonctt.com]
Sent: Friday, December 27, 2002 9:54 AM
To: 'Desmond'; Tran Tien Phong; ccielab@groupstudy.com
Subject: RE: Dialer Profile Backup Question
Desmond,
Use ppp callback at both bri interface and dialer interface.
Thanks,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Desmond
Sent: Friday, December 27, 2002 6:59 AM
To: Tran Tien Phong; ccielab@groupstudy.com
Subject: Re: Dialer Profile Backup Question
Here is the configs. I saw the bri0:2 tried to call back, but it teared
down
right alway.
hostname R2
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 75755510000101
isdn spid2 75755510010101
ppp authentication chap
!
interface Dialer0
bandwidth 128
ip address 172.16.72.1 255.255.255.252
ip access-group 155 in
encapsulation ppp
dialer pool 1
dialer remote-name R7
dialer string 5552000
dialer load-threshold 1 either
dialer-group 1
ppp callback request
ppp authentication chap
ppp multilink
hostname R7
!
interface BRI0
no ip address
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-ni
isdn spid1 75755520000101
isdn spid2 75755520010101
ppp authentication chap
!
interface Dialer0
bandwidth 128
ip address 172.16.72.2 255.255.255.252
encapsulation ppp
dialer pool 1
dialer remote-name R2
dialer string 5551000 class r7r2
dialer load-threshold 1 either
dialer-group 1
ppp callback accept
ppp authentication chap
ppp multilink
!
----- Original Message -----
From: "Tran Tien Phong" <PhongTT2@FPT.COM.VN>
To: "Desmond" <cciestudy@sympatico.ca>; <ccielab@groupstudy.com>
Sent: Tuesday, December 24, 2002 11:31 PM
Subject: RE: Dialer Profile Backup Question
> Pls put your configs
>
> -----Original Message-----
> From: Desmond [mailto:cciestudy@sympatico.ca]
> Sent: Wed 12/25/2002 1:31 AM
> To: ccielab@groupstudy.com
> Cc:
> Subject: Dialer Profile Backup Question
>
>
>
> I tried do do callback from Dialer profile on different VLabs. The 2nd
> channel never works. I saw the 2nd channel up and down twice.
> It works prefectly with legacy method.
>
> Is it an IOS bug ?
>
>
> Thanks !
>
> Desmond
> .
> .
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3