RE: DLSW+ - please help!!!

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Dec 26 2002 - 04:28:29 GMT-3


you're right .; )

Donny

                                                                                                                                       
                      "Janto Cin"
                      <jantocin@datacom To: "'Donny MATEO'" <donny.mateo@sg.ca-indosuez.com>
                      m.co.id> cc:
                                               Subject: RE: DLSW+ - please help!!!
                      26-12-2002 15:11
                      Please respond to
                      "Janto Cin"
                                                                                                                                       
                                                                                                                                       

Should be 00-0a-20-9d-a2-21 ?
Correct me if I'm wrong.

Janto

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Donny MATEO
Sent: Thursday, December 26, 2002 1:31 PM
To: Hunt Lee
Cc: ccielab@groupstudy.com
Subject: Re: DLSW+ - please help!!!

that is canonical. Try non canonical and see how it goes.
00-0a-20-9c-a2-21

Donny

                      Hunt Lee

                      <ciscoforme3@yaho To:
ccielab@groupstudy.com

                      o.com.au> cc:

                      Sent by: Subject: DLSW+ - please
help!!!
                      nobody@groupstudy

                      .com

                      26-12-2002 13:37

                      Please respond to

                      Hunt Lee

Merry Christmas and Happy New Year!!! I can't find anything else better
to do than to play with my routers. So much fun! =)

My question - is there any trick to the commands:-

dlsw icanreach mac-exclusive
&
dlsw icanreach mac-address <xxxx.xxxx.xxxx>?

I have the following lab setup:-

                  RTA
                 / \
WebCentral11---RTB RTC --- Hardcat-laptop

Both workstations are on Ethernet.

And the three routers are in a Frame-relay network.

I must have done something fundermentally wrong. Since if I remove the
2 icanreach commands, everything is ok (i.e. I can see Network
neighborhood, I can see the DLSW circuit up etc). But as soon as I put
back the commands, I can't see anything.

My laptop (WebCentral11)'s MAC address is 0050.04b9.4584.

C:\>ipconfig /all

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : FE575C-3COM 10/100 LAN CardBus-Fast
Ethernet Physical Address. . . . . . . . . : 00-50-04-B9-45-84 Dhcp
Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . :
Yes Autoconfiguration IP Address. . . : 169.254.205.7 Subnet Mask . . .
. . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . :

C:\>

And I have confirmed it with:-

RTB#sh bridge

Total of 300 station blocks, 298 free
Codes: P - permanent, S - self

Bridge Group 1:

    Address Action Interface Age RX count TX count
0050.ba76.ea5f forward DLSw Port0 0 1 1
0050.04b9.4584 forward Ethernet0 0 1 0
RTB#

RTC#sh bridge

Total of 300 station blocks, 298 free
Codes: P - permanent, S - self

Bridge Group 1:

    Address Action Interface Age RX count TX count
0050.ba76.ea5f forward Ethernet0 0 9 1
0050.04b9.4584 forward DLSw Port0 0 1 3
RTC#

And here's the config:-

For RTB-

dlsw local-peer peer-id 1.1.1.1 promiscuous
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 0050.04b9.4584 mask ffff.ffff.ffff dlsw
bridge-group 1

interface Loopback0
 ip address 1.1.1.1 255.255.255.255

interface Ethernet0
 no ip address
 bridge-group 1

bridge 1 protocol ieee

As for RTC-

dlsw local-peer peer-id 2.2.2.2
dlsw remote-peer 0 tcp 1.1.1.1
dlsw bridge-group 1

interface Loopback1
 ip address 2.2.2.2 255.255.255.255

interface Ethernet0
 no ip address
 bridge-group 1

bridge 1 protocol ieee

It would be greatly appreciated if anyone can shed some light on this.

Hunt

http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer, to buy
or sell any banking or financial instruments or services and no
representation or warranty is given in respect of its accuracy,
completeness or fairness. The material is subject to change without
notice. You should take your own independent tax, legal and other
professional advice in respect of the content of this message. This
message may contain confidential or legally privileged material and may
not be copied, redistributed or published (in whole or in part) without
our prior written consent. This email may have been intercepted,
partially destroyed, arrive late, incomplete or contain viruses and no
liability is accepted by any member of the Credit Agricole Indosuez
group as a result. If you are not the intended recipient of this
message, please immediately notify the sender and delete this message
from your computer. .
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
.



This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3