From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Dec 26 2002 - 03:31:20 GMT-3
that is canonical. Try non canonical and see how it goes.
00-0a-20-9c-a2-21
Donny
Hunt Lee
<ciscoforme3@yaho To: ccielab@groupstudy.com
o.com.au> cc:
Sent by: Subject: DLSW+ - please help!!!
nobody@groupstudy
.com
26-12-2002 13:37
Please respond to
Hunt Lee
Merry Christmas and Happy New Year!!! I can't find anything else better to do than
to play with my routers. So much fun! =)
My question - is there any trick to the commands:-
dlsw icanreach mac-exclusive
&
dlsw icanreach mac-address <xxxx.xxxx.xxxx>?
I have the following lab setup:-
RTA
/ \
WebCentral11---RTB RTC --- Hardcat-laptop
Both workstations are on Ethernet.
And the three routers are in a Frame-relay network.
I must have done something fundermentally wrong. Since if I remove the 2 icanreach
commands, everything is ok (i.e. I can see Network neighborhood, I can see the DLSW
circuit up etc). But as soon as I put back the commands, I can't see anything.
My laptop (WebCentral11)'s MAC address is 0050.04b9.4584.
C:\>ipconfig /all
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : FE575C-3COM 10/100 LAN CardBus-Fast Ethernet
Physical Address. . . . . . . . . : 00-50-04-B9-45-84
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IP Address. . . : 169.254.205.7
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
C:\>
And I have confirmed it with:-
RTB#sh bridge
Total of 300 station blocks, 298 free
Codes: P - permanent, S - self
Bridge Group 1:
Address Action Interface Age RX count TX count
0050.ba76.ea5f forward DLSw Port0 0 1 1
0050.04b9.4584 forward Ethernet0 0 1 0
RTB#
RTC#sh bridge
Total of 300 station blocks, 298 free
Codes: P - permanent, S - self
Bridge Group 1:
Address Action Interface Age RX count TX count
0050.ba76.ea5f forward Ethernet0 0 9 1
0050.04b9.4584 forward DLSw Port0 0 1 3
RTC#
And here's the config:-
For RTB-
dlsw local-peer peer-id 1.1.1.1 promiscuous
dlsw icanreach mac-exclusive
dlsw icanreach mac-address 0050.04b9.4584 mask ffff.ffff.ffff
dlsw bridge-group 1
interface Loopback0
ip address 1.1.1.1 255.255.255.255
interface Ethernet0
no ip address
bridge-group 1
bridge 1 protocol ieee
As for RTC-
dlsw local-peer peer-id 2.2.2.2
dlsw remote-peer 0 tcp 1.1.1.1
dlsw bridge-group 1
interface Loopback1
ip address 2.2.2.2 255.255.255.255
interface Ethernet0
no ip address
bridge-group 1
bridge 1 protocol ieee
It would be greatly appreciated if anyone can shed some light on this.
Hunt
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3