From: Songbin Wei (sbwei_2000@yahoo.com)
Date: Wed Dec 25 2002 - 03:39:51 GMT-3
Sage, the mask for the advertising router should be
INVERSE MASK. Both the documentation and the ? help
made a mistake regarding this. So in your case, you
need to configure:
distance 200 116.16.16.1 0.0.0.0
thanks,
S.B
--- Sage Vadi <sagevadi@yahoo.co.uk> wrote:
> Merry Christmas and Happy New Year.
>
> Topology:
>
> R1-----------------------------------R2
> 116.16.16.1/30 116.16.16.2/30
>
> Problem Description:
>
> R2 learns OSPF routes from R1. Using the distance
> command, I configure the following in R2:
>
> * distance 200 116.16.16.1 255.255.255.252
> which OSPF converts into:
> * distance 200 0.0.0.1 255.255.255.252
>
> I don't have a problem if OSPF converts it.
> But here is what happens on R2's route table:
>
> O IA 116.16.13.0/25 [200/74] via 116.16.16.1
> O E1 190.190.0.0 [200/158] via 116.16.16.1
> [200/158] via 116.16.26.2 **
> O E2 172.16.0.0 [200/20] via 116.16.16.1
> [200/20] via 116.16.26.2 **
> O E2 110.110.0.0 [200/20] via 116.16.16.1
>
> NB: ** OSPF routes learnt from 116.16.26.2 also
> increased to 200. Q) Why does that occur? To be
> short
> and concise I have not drawn the other routes to
> which
> R2 is connected to.
>
> My aim is to increase all the routes learnt from
> R1/116.16.16.1 to 200. Ideas?
>
> rgds,
> Sage
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3