Re: 32 bits mask?

From: Chris Home (clarson52@comcast.net)
Date: Tue Dec 24 2002 - 20:34:16 GMT-3


What is an NNCDS, NNCSS?

----- Original Message -----
From: "Tony Schaffran" <tschaffran@cconlinelabs.com>
To: "'Thomas Wan'" <wtthomas@etang.com>; <zhouhenglei@wondersgroup.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, December 24, 2002 5:52 PM
Subject: RE: 32 bits mask?

> You might want to try to set your "ip ospf network" statement under the
> interface.
>
>
> Tony Schaffran
> Network Analyst
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> CCOnlineLabs.com
> http://www.cconlinelabs.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Thomas Wan
> Sent: Tuesday, December 24, 2002 5:23 PM
> To: zhouhenglei@wondersgroup.com
> Cc: ccielab@groupstudy.com
> Subject: 32 bits mask?
>
> Hi!
> How can I do to change the 32 bits mask into 29 bits?
> R4:
> !
> interface Serial0.1 multipoint
> ip address 135.4.100.4 255.255.255.248
> ip ospf network point-to-multipoint
> frame-relay map ip 135.4.100.3 403 broadcast
> frame-relay map ip 135.4.100.6 406 broadcast
> !
> router ospf 1
> log-adjacency-changes
> network 135.4.100.0 0.0.0.7 area 1
> !
> O 135.4.100.6/32 [110/64] via 135.4.100.6, 00:10:08, Serial0.1
> O 135.4.100.3/32 [110/64] via 135.4.100.3, 00:10:08, Serial0.1
>
> R3:
> !
> interface Serial0
> ip address 135.4.100.3 255.255.255.248
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> frame-relay map ip 135.4.100.4 304 broadcast
> frame-relay map ip 135.4.100.6 304 broadcast
> !
> router ospf 1
> log-adjacency-changes
> network 135.4.100.0 0.0.0.7 area 1
> !
> O 135.4.100.6/32 [110/128] via 135.4.100.4, 00:45:24, Serial0
> O 135.4.100.4/32 [110/64] via 135.4.100.4, 00:45:24, Serial0
>
> R6:
> !
> interface Serial0
> ip address 135.4.100.6 255.255.255.248
> encapsulation frame-relay
> ip ospf network point-to-multipoint
> no fair-queue
> frame-relay map ip 135.4.100.3 604 broadcast
> frame-relay map ip 135.4.100.4 604 broadcast
> !
> router ospf 1
> log-adjacency-changes
> network 135.4.6.0 0.0.0.255 area 1
> network 135.4.100.0 0.0.0.7 area 1
> !
> O 135.4.100.4/32 [110/64] via 135.4.100.4, 00:45:44, Serial0
> O 135.4.100.3/32 [110/128] via 135.4.100.4, 00:45:44, Serial0
> .
> .
.



This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:52 GMT-3