From: kym blair (kymblair@hotmail.com)
Date: Mon Dec 23 2002 - 15:42:22 GMT-3
Janto,
If the ESI of the remote router is provided, activate pvc 0/5 qsaal and 0/16
ilmi and use "show atm ilmi-status" to get the prefix, and then map the
remote as the nsap server. If the esi is not provided, you cannot discover
it so your router must be the server ... "atm nsap-server self"
HTH, Kym
>From: Solomon Ghebremariam <sghebrem@cisco.com>
>Reply-To: Solomon Ghebremariam <sghebrem@cisco.com>
>To: "Janto Cin" <jantocin@datacomm.co.id>
>CC: <ccielab@groupstudy.com>
>Subject: RE: Please Help: ATM SVC (How to discover arp server nsap
>address?)
>Date: Mon, 23 Dec 2002 10:13:05 -0800
>
> It has to be. I don't know of anyway discovering it. Unless some folks
>have an idea.
>
>Solomon
>
>At 03:21 PM 12/23/2002 +0700, Janto Cin wrote:
>
> hi solomon,
> thanks for the reply.
> so the esi address of remote router will be provided to us?
> how about that we don't have any information of the esi address of
> remote router?
> is there any way to find out? or configuration needed on the remote
> router/atm switch?
>
> janto
>
> -----Original Message-----
> From: Solomon Ghebremariam [mailto:sghebrem@cisco.com]
> Sent: Monday, December 23, 2002 2:15 PM
> To: Janto Cin
> Subject: Re: Please Help: ATM SVC (How to discover arp server
> nsap address?)
>
> try show atm ilimi status
>
> you will see the nsap address of the ATM switch then you are
> going to need the esi address (of the router at the other
> end) given to you because it is changed using atm
> esi-address so the other end can have anything.
>
> and don't forget
>
> atm pvc 5 0 5 qsaal
> atm pvc 16 0 16 ilmi
>
> At 01:20 PM 12/23/2002 +0700, you wrote:
>
> Dear All,
>
> Example:
>
> R6(atm4/0)----------ATM Switch---------(atm3/0)R9
>
> R9
> ----
> Int atm 3/0
> Ip add 172.16.69.2 255.255.255.252
> Atm esi-address 101010101010.00
> Atm arp-server self
> Pvc 0/5 qsaal
> Pvc 0/16 ilmi
>
> R6
> ----
> Int atm 4/0
> Ip add 172.16.69.1 255.255.255.252
> Atm esi-address 202020202020.00
> Pvc 0/5 qsaal
> Pvc 0/16 ilmi
>
> How to discover arp server nsap address ? Debug atm arp
> (nothing happen
> on my lab)?
>
> Thank you,
> Janto
> .
>.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:51 GMT-3