From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sun Dec 22 2002 - 09:31:36 GMT-3
Keep it simple :)
> Try this, in router-config mode use the "distance (ad) x.x.x.x (mask)"
> command. Enter the ip address of the router originating the network in
> question. You can lower it or make it higher depending on what you want to
> do.
>
> Here's an example:
>
> To change route's coming in from neighbour 172.100.200.1 to ad of 201
>
> !
> router ospf 1
> distance 201 172.100.200.1 0.0.0.0
> end
> !
>
> I sometimes have to modify the AD of OSPF from its default to get it to
> work. You might also have to enter a network from the neighbour to make it
> work...like..."distance 201 10.10.10.0 0.0.0.255" - (net 10.10.10.0 coming
> from the neighbour in question)
>
> You can always try some funky route-maps if you like or do filtering.
>
> You can also use the above method for EIGRP ( took me ages to finally learn
> this work-around...slow learner)
>
> Let me know if I helped or confused you even more.
>
> Jbell
> ----- Original Message -----
> From: "Desmond" <cciestudy@sympatico.ca>
> To: <ccielab@groupstudy.com>
> Sent: Sunday, December 22, 2002 12:30 AM
> Subject: OSPF preferable router or path
>
>
> > I have following scenario. R1, R2 and R3 are on Ethernet and in an OSPF
> > Totally Stub Area. Both R1 and R2 area ABRs and send default router to R3.
> >
> >
> > R1 R2
> > | |
> > | |
> > -----------------
> > |
> > R3
> >
> >
> > The question is how I can make R2 is a preferable router or exit point.
> > Here is the solution from some Lab workbooks and scenarios.
> >
> > R1
> > int E0
> > ip ospf cost 20
> >
> > R2
> > int E0
> > ip ospf cost 5
> >
> > I tested with my home lab. It doesn't work. I think the "ip ospf cost" is
> > local significant.
> >
> > Can someone provide me answer ?
> >
> > Thanks in advance !
> >
> >
> > Des
> > .
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:51 GMT-3