From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sun Dec 22 2002 - 09:23:41 GMT-3
Hi,
You can summarize only on the boundary, ie between two areas.
> Hi!
>
> I have x amount of loopback interfaces configured in
> my internal router. I need to summarize them. Loopback
> interfaces by default are host routes, workaround is
> to enable "ip ospf net point-to-point" under their
> local interface - and their actual subnet is
> advertised.
>
> That is fine.
>
> But the problem is that loopback interfaces when they
> are advertised using the network command ie - NOT
> redistribute connected. Seem NOT to be able to be
> summarized using the area range command. When I use
> the redistribute connected and summary-address - this
> works!!!
>
> What is the problem here? Or is redistribute-connected
> inclusive of summary-address the ONLY way to summarize
> loopback networks?
>
> rgds,
> Sage
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:51 GMT-3