From: rehan u nedaria (rehannedaria@rediffmail.com)
Date: Sat Dec 21 2002 - 23:56:35 GMT-3
Hi Des
Try this command area area-id default-cost ---Assign a
specific cost to the default summary route used for the stub
area.Let me know..how it goes
Regards
Rehan
On Sun, 22 Dec 2002 Desmond wrote :
>I have following scenario. R1, R2 and R3 are on Ethernet and
>in an OSPF
>Totally Stub Area. Both R1 and R2 area ABRs and send default
>router to R3.
>
>
>R1 R2
>| |
>| |
>-----------------
> |
> R3
>
>
>The question is how I can make R2 is a preferable router or exit
>point.
>Here is the solution from some Lab workbooks and scenarios.
>
>R1
>int E0
> ip ospf cost 20
>
>R2
> int E0
> ip ospf cost 5
>
>I tested with my home lab. It doesn't work. I think the "ip ospf
>cost" is
>local significant.
>
>Can someone provide me answer ?
>
>Thanks in advance !
>
>
>Des
>.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:50 GMT-3