From: Neil Moore (neil@droopy.com)
Date: Fri Dec 20 2002 - 15:11:51 GMT-3
Setting it yourself means you will always know what it is for virtual
links.. My advise.. lock em
----------------------------------------
Neil Moore CCIE#10044
----- Original Message -----
From: "Jennifer Bellucci" <Jennifer_bellucci@hotmail.com>
To: "Matthew Poole" <matthew.poole@blueyonder.co.uk>;
<ccielab@groupstudy.com>
Sent: Friday, December 20, 2002 12:25 PM
Subject: Re: OSPF Router ID
> I personally prefer to choose the router-id myself and make sure that if
BGP
> is also in use, make sure that BGP uses the same router-id. I have solved
> many a problems using this trusted routine.
>
> ----- Original Message -----
> From: "Matthew Poole" <matthew.poole@blueyonder.co.uk>
> To: <ccielab@groupstudy.com>
> Sent: Friday, December 20, 2002 4:09 PM
> Subject: OSPF Router ID
>
>
> > What's the preferred method for setting router ID?
> >
> > 1. Router-ID command - never seen this before today.
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
> /
> > iprprt2/1rdospf.htm#xtocid32
> > 2. Loopback interface (highest IP).
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_c
> /
> > ipcprt2/1cdospf.htm#xtocid17
> >
> > All config's I've seen prefer the second method.
> >
> > Any thoughts?
> > .
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:50 GMT-3