Re: Output of "Show ip inteface brief "

From: P729 (p729@cox.net)
Date: Thu Dec 19 2002 - 00:29:22 GMT-3

• Next message: P729: "Re: internals of passive interface"
• Previous message: OhioHondo: "RE: internals of passive interface"
• Maybe in reply to: sam_pilot: "Output of "Show ip inteface brief ""
• Next in thread: Erick B.: "Re: Output of "Show ip inteface brief ""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Try configuring an IP address on one of the interfaces and do a 'sh ip int
brie' before saving the config and see what it says. My guess is it would
say "manual." Then save the config and reboot and see if it changes (to
"NVRAM").

Regards,

Mas Kato
https://ecardfile.com/id/mkato
----- Original Message -----
From: "sam_pilot" <sam_pilot@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, December 18, 2002 6:00 PM
Subject: Output of "Show ip inteface brief "

Hi

Can someone tell me what this output means

R8#sho ip int brief
Interface IP-Address OK? Method Status
Prot
ocol
Ethernet0 unassigned YES TFTP administratively down
down

Ethernet1 unassigned YES TFTP administratively down
down

For Ethernet 0 and Ethernet 1 the "Method" is showing as TFTP.
What does this mean? All my other routers show NVRAM in that field

Thanks

Sam Pilot
.
.

• Next message: P729: "Re: internals of passive interface"
• Previous message: OhioHondo: "RE: internals of passive interface"
• Maybe in reply to: sam_pilot: "Output of "Show ip inteface brief ""
• Next in thread: Erick B.: "Re: Output of "Show ip inteface brief ""
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:48 GMT-3