From: Erick B. (erickbe@yahoo.com)
Date: Thu Dec 19 2002 - 01:20:11 GMT-3
TFTP means that the current config was loaded (or
added/merged) from a TFTP server.
Example:
(before tftp)
router#show ip int brief | ex ass
Interface IP-Address OK? Method
BRI0 200.200.200.1 YES NVRAM
Ethernet0 192.168.1.10 YES NVRAM
#copy tftp running-config
(file on tftp server just has a int lo33 config)
router#show ip int brief | ex ass
Interface IP-Address OK? Method
BRI0 200.200.200.1 YES NVRAM
Ethernet0 192.168.1.10 YES NVRAM
Loopback34 1.2.3.4 YES TFTP
--- P729 <p729@cox.net> wrote:
> Try configuring an IP address on one of the
> interfaces and do a 'sh ip int
> brie' before saving the config and see what it says.
> My guess is it would
> say "manual." Then save the config and reboot and
> see if it changes (to
> "NVRAM").
>
> Regards,
>
> Mas Kato
> https://ecardfile.com/id/mkato
> ----- Original Message -----
> From: "sam_pilot" <sam_pilot@hotmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, December 18, 2002 6:00 PM
> Subject: Output of "Show ip inteface brief "
>
>
> Hi
>
> Can someone tell me what this output means
>
> R8#sho ip int brief
> Interface IP-Address OK?
> Method Status
> Prot
> ocol
> Ethernet0 unassigned YES TFTP
> administratively down
> down
>
> Ethernet1 unassigned YES TFTP
> administratively down
> down
>
>
> For Ethernet 0 and Ethernet 1 the "Method" is
> showing as TFTP.
> What does this mean? All my other routers show NVRAM
> in that field
>
> Thanks
>
> Sam Pilot
> .
> .
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:49 GMT-3