pinging switch

From: Nathan Chessin (nchessin@cisco.com)
Date: Wed Dec 18 2002 - 21:16:24 GMT-3

• Next message: Joe: "RE: DHCP options question."
• Previous message: Fabrice Bobes: "RE: How can I copy a big file to two Flash cards?"
• Next in thread: Tony Schaffran: "RE: pinging switch"
• Maybe reply: Tony Schaffran: "RE: pinging switch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi All,

I can ping my 3550 on a vlan when it is in L2 mode, but when I enable "ip
routing" it doesn't seem to be working. Is this normal behavior?

For instance, if I have have Fa0/2 in vlan 2, assign an IP Address of
22.2.2.2/24 to it, and don't have "ip routing" enabled, I can ping it from a
host connected to Fa0/2 with ip add 22.2.2.1/24. But when I enable "ip
routing" if fails.

Any help?

Thanks,

Nate
.

• Next message: Joe: "RE: DHCP options question."
• Previous message: Fabrice Bobes: "RE: How can I copy a big file to two Flash cards?"
• Next in thread: Tony Schaffran: "RE: pinging switch"
• Maybe reply: Tony Schaffran: "RE: pinging switch"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:48 GMT-3