From: James Scobey (jscobey@sms.com)
Date: Tue Dec 17 2002 - 22:03:37 GMT-3
That works for CatOS. If you're running native IOS you have to use the
"interface range" command.
--Scobey
----- Original Message -----
From: "Chuck Church" <ccie8776@rochester.rr.com>
To: "Jaksec, Nick" <Nick.Jaksec@acs-inc.com>; "CCIE (E-mail)"
<ccielab@groupstudy.com>
Sent: Tuesday, December 17, 2002 7:33 PM
Subject: Re: Cat 4000 question
> set vlan 1 2/3-10
>
> will put ports 3 through 10 of slot 2 into vlan 1.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: "Jaksec, Nick" <Nick.Jaksec@acs-inc.com>
> To: "CCIE (E-mail)" <ccielab@groupstudy.com>
> Sent: Tuesday, December 17, 2002 4:21 PM
> Subject: Cat 4000 question
>
>
> > How can you add a range of ports to a single vlan on a 4000 series
> switch??
> > .
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:47 GMT-3