From: Evgeny Tantsura (ivgen@castel.nl)
Date: Sun Dec 15 2002 - 15:10:15 GMT-3
Depends on the isdn switch type.
For instance, basic-net3 doesn't need any spid numbers.
> Hunt,
>
> I always use spid numbers and dialer map in ISDN.
> The dialer string is more for dialer profiles.
>
> The first thing I configure when I am working with
> ISDN is the spid numbers. Actually here is the
> sequence:
>
> 1. Configure switch type
> 2. configure spid numbers while BRI interface is shut
> down.
> 3. NO SHUT the BRI interface
> 4 Test with "sho isdn status" to make sure your spid
> numbers and the connection to the simulator (or tel
> company) are good.
> 5. Then you can configure IP address, encapsulation,
> authentication, dialer map, etc.
>
> Loizos
> --- Hunt Lee <huntl@webcentral.com.au> wrote:
> > Hello,
> >
> > I am just a starter on learning ISDN (by testing it
> > out on ISDN Simulator).
> > Can someone please explain to me when I will need to
> > use the "isdn spid
> > <xxxx>" interface config command?? Is there any
> > circumstances that I will
> > need to use it?? e.g. when using
> >
> > - dialer string command
> > - dialer map ip command
> > - dialer interface
> >
> > Any help will be greatly appreciated.
> >
> > Best Regards,
> > Hunt Lee
> > .
> >
> __________________________________________________________________
> > To unsubscribe from the CCIELAB list, send a message
> > to
> > majordomo@groupstudy.com with the body containing:
> > unsubscribe ccielab
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:46 GMT-3