From: Scott Page (scpage@cisco.com)
Date: Fri Dec 13 2002 - 19:22:35 GMT-3
Very little config needed, just create the cross connect between the two atm
interfaces..see below i cross connected
pvc 32 and 33 and 100 and 101.
I generally just use one pvc for my labs but configured 2 for some other
testing.
This config will work for pvcs, svcs.
ls1010-1#sh run
ls1010-1#sh running-config
Building configuration...
Current configuration:
!
version 11.2
no service pad
service timestamps debug datetime msec localtime
no service password-encryption
no service udp-small-servers
no service tcp-small-servers
!
hostname ls1010-1
!
enable password cisco
!
no ip domain-lookup
!
atm address 47.0091.8100.0000.0050.e209.aa01.0050.e209.aa01.00
atm router pnni
node 1 level 56 lowest
redistribute atm-static
!
clock timezone eastern -5
!
interface ATM0/0/0
!
interface ATM0/0/1
!
interface ATM0/0/2
!
interface ATM0/0/3
!
interface ATM0/1/0
!
interface ATM0/1/1
atm pvc 0 32 interface ATM0/1/0 0 33
atm pvc 0 101 interface ATM0/1/0 0 100
!
interface ATM0/1/2
!
interface ATM0/1/3
!
interface CBR1/0/0
no ip address
!
interface CBR1/0/1
no ip address
!
interface CBR1/0/2
no ip address
!
interface CBR1/0/3
no ip address
!
interface CBR1/1/0
no ip address
!
interface CBR1/1/1
no ip address
!
interface CBR1/1/2
no ip address
!
interface CBR1/1/3
no ip address
!
interface ATM2/0/0
no ip address
atm maxvp-number 0
!
interface Ethernet2/0/0
ip address 10.0.0.10 255.0.0.0
!
interface CBR3/0/0
no ip address
!
interface CBR3/0/1
no ip address
!
interface CBR3/0/2
no ip address
!
interface CBR3/0/3
no ip address
!
interface CBR3/1/0
no ip address
!
interface CBR3/1/1
no ip address
!
interface CBR3/1/2
no ip address
!
interface CBR3/1/3
no ip address
!
interface ATM4/0/0
clock source free-running
!
interface ATM4/1/0
!
interface ATM4/1/1
!
interface ATM4/1/2
!
interface ATM4/1/3
!
no ip classless
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
password cisco
login
!
end
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
MOLINA, MARTIN J (PBI)
Sent: Friday, December 13, 2002 4:53 PM
To: 'Surjamukhi Chatterjea'; 'Rasheim Myers'; ccielab@groupstudy.com
Subject: RE: ATM SVC/PVC
If you can get your hands on the Solie book he has one in there that I used.
One config will support all ATM PVC/SVC scenarios.
-----Original Message-----
From: Surjamukhi Chatterjea [mailto:surchatt@cisco.com]
Sent: Friday, December 13, 2002 1:25 PM
To: 'Rasheim Myers'; ccielab@groupstudy.com
Subject: RE: ATM SVC/PVC
If you look in the archives, there was a discussion on ATM in November,
and the thread inlcuded an LS1010 config.
HTH
Surja
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Rasheim Myers
Sent: Friday, December 13, 2002 8:28 AM
To: ccielab@groupstudy.com
Subject: ATM SVC/PVC
Does anyone have an ATM LS1010 SVC/PVC configuration? I have access to the
switch but do not have a configuration to work from.
Thanks
Rasheim
.
.
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3