From: Joe Chang (changjoe@earthlink.net)
Date: Fri Dec 13 2002 - 15:49:30 GMT-3
Hi Rehan,
> But the no-adv community route is not working.The community
> attribute is been removed from the table at R1 but still the route
> is not advertised to any nieghbour.
Try this on R1:
route-map test1 permit 10
set community none
What you are currently doing in test1 is clearing out the community for
199.0.0.0 only. R1 still has to evaluate 200.0.0.0 with its no-advertise
community, which is why it's not getting out to R2.
If you do a "show ip bgp community no-advertise" on R1, you'll see Im
talking about.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:45 GMT-3