Switch Config Proset

From: Kip Palmer (RES176RR@verizon.net)
Date: Sat Dec 07 2002 - 01:15:27 GMT-3

• Next message: Waheed Mir: "R&S Lab swap@SJ"
• Previous message: Mahmud, Yasser: "RE: ICANREACH Mac-Exclusive"
• Next in thread: Chris Home: "Re: Switch Config Proset"
• Maybe reply: Chris Home: "Re: Switch Config Proset"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello-

Has anyone got the catalyst switch config for this Intel Proset2 dual
port adapter?
I'm trying to run it w/ 2 100mg / FastEtherchannel using a port group.
(ALB FEC)

Intel is about the lamest at documentation.

-----Here's what I've got:

<two server nic ports on switch>

interface FastEthernet0/3
 duplex full
 speed 100
 port group 1 distribution destination
 switchport access vlan 10
 switchport trunk encapsulation dot1q
 switchport mode trunk
!
interface FastEthernet0/4
 duplex full
 speed 100
 port group 1 distribution destination
 switchport access vlan 10
 switchport trunk encapsulation dot1q
 switchport mode trunk

---
<Cisco Fa1.0 3620 router port on switch>
interface FastEthernet0/2
 duplex full
 speed 100
 switchport access vlan 10
----
Thanks in advance!
Kip Palmer
.

• Next message: Waheed Mir: "R&S Lab swap@SJ"
• Previous message: Mahmud, Yasser: "RE: ICANREACH Mac-Exclusive"
• Next in thread: Chris Home: "Re: Switch Config Proset"
• Maybe reply: Chris Home: "Re: Switch Config Proset"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:40 GMT-3