From: Cisco Engineer (ciscocalifornia@yahoo.com)
Date: Thu Dec 05 2002 - 13:43:46 GMT-3
Thanks
Joy
--- Chuck Church <cchurch@optonline.net> wrote:
> Richard,
>
> DHCP relies on the DHCP server keeping a mapping
> of IP addresses it's
> handed out to client MAC addresses. With no MAC
> address on a serial
> interface, I don't think DHCP could support it.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: <richard.von.essen@ns.sigma.se>
> To: <ccielab@groupstudy.com>
> Sent: Thursday, December 05, 2002 8:35 AM
> Subject: Autoinstall over Frame-relay using dhcp?
>
>
> > Hi !
> >
> > Can anyone confirm if it is possible to use pure
> dhcp to do autoinstall
> > over frame-relay. I allready know of using the
> standard frame-relay
> > autoinstall feauture using bootp and forwarding
> with IP-helper to
> > TFTP-server. Now my question is if it is possible
> to use the IOS
> > DHCP-server instead and setting up IP addresses
> for the booting router to
> > use.
> > I have looked on Cisco, they just say dhcp
> autoinstall in 12.1 is for
> > lan-interfaces.
> >
> > Just curious to hear if someone has done it, as
> rumours say this is
> > somewhat tested in the new exam...
> >
> >
> > Regards
> >
> > Richard von Essen
> > Network Engineer
> > Sigma Meldata AB
> >
> > richard.von.essen@ns.sigma.se
> > Tel.: +46 8 734 4138
> > Mobile: +46 703 791905
> > Fax: +46 8 82 26 97
>
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:39 GMT-3