From: Chuck Church (cchurch@optonline.net)
Date: Thu Dec 05 2002 - 12:50:48 GMT-3
Richard,
DHCP relies on the DHCP server keeping a mapping of IP addresses it's
handed out to client MAC addresses. With no MAC address on a serial
interface, I don't think DHCP could support it.
Chuck Church
CCIE #8776, MCNE, MCSE
----- Original Message -----
From: <richard.von.essen@ns.sigma.se>
To: <ccielab@groupstudy.com>
Sent: Thursday, December 05, 2002 8:35 AM
Subject: Autoinstall over Frame-relay using dhcp?
> Hi !
>
> Can anyone confirm if it is possible to use pure dhcp to do autoinstall
> over frame-relay. I allready know of using the standard frame-relay
> autoinstall feauture using bootp and forwarding with IP-helper to
> TFTP-server. Now my question is if it is possible to use the IOS
> DHCP-server instead and setting up IP addresses for the booting router to
> use.
> I have looked on Cisco, they just say dhcp autoinstall in 12.1 is for
> lan-interfaces.
>
> Just curious to hear if someone has done it, as rumours say this is
> somewhat tested in the new exam...
>
>
> Regards
>
> Richard von Essen
> Network Engineer
> Sigma Meldata AB
>
> richard.von.essen@ns.sigma.se
> Tel.: +46 8 734 4138
> Mobile: +46 703 791905
> Fax: +46 8 82 26 97
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:39 GMT-3