From: CCIE2B (ccie2b@cox.net)
Date: Mon Dec 02 2002 - 02:05:14 GMT-3
Thanks all, this solution helped....
----- Original Message -----
From: "Jennifer Bellucci" <Jennifer_bellucci@hotmail.com>
To: <ccie2b@cox.net>
Sent: Saturday, November 30, 2002 4:51 PM
Subject: Re: IOS Upgrade
> your flash is 'read-only'...change the config-reg to 0x2101 and reload.
You
> will then able to copy tftp to flash, it will ask you if you want to erase
> the current flash file system, click yes...and off it goes.
> Bear in mind that you should have a interface configured for the tftp
server
> and don't forget to change the config-reg value back to its default.
>
> Another cool way is to enter the boot tftp command, then reload. This also
> makes the flash read/write.
>
> Let me know how you get along.
> ----- Original Message -----
> From: <ccie2b@cox.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, November 30, 2002 11:56 PM
> Subject: IOS Upgrade
>
>
> > I am having a problem upgrading my IOS. I have 16M Flash and 16M
Memory.
> Here is the output of show ver:
> >
> > cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
> memory.
> > Processor board ID 02936846, with hardware revision 00000001
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > Basic Rate ISDN software, Version 1.1.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 2 Serial network interface(s)
> > 8 Low-speed serial(sync/async) network interface(s)
> > 1 ISDN Basic Rate interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read ONLY)
> >
> > When I try to do a copy tftp flash, I get the following message:
> > %Error: Image size exceeds free space
> >
> > The image I am trying to load is only 14,152KB in size. It seems that I
> do have enough space for this image, could anyone help to explain this?
> Thanks in advance...
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:37 GMT-3