From: mnmbaker@cfl.rr.com
Date: Fri Nov 29 2002 - 14:42:38 GMT-3
My apologies, you are correct (I need to learn to read better!). Is the network
192.168.4.0 in the routing table for R13 and the network 192.168.1.0 in the
routing table for R3?
Mark
> Sorry. But I can not find which one I violate.
> Because source and destination are interface IPs. THe
> IPs on tunnel interfaces are unique.
>
> --- mnmbaker@cfl.rr.com wrote:
> > Your tunnel source and destinations need to point to
> > actual IPs on the routers.
> > The "source" should be an interface IP on the local
> > router, the "dest" should
> > be an interface IP on the remote router.
> > For R3, your source could be 10.3.1.3 and dest could
> > be 10.2.1.13, then reverse
> > for source and dest on R13.
> > The IP address on the tunnel interface is part of
> > the tunnel's network, which
> > needs to be unique from the other interfaces.
> >
> > Mark
> >
> > > (lo0)R3(e0)----(e0)R5(s0.1)----(s0)R13(e0)
> > >
> > > IP for E3:
> > > lo0: 10.3.1.3/24
> > > e0: 192.168.4.3/24
> > >
> > > IP for R13:
> > > s0: 192.168.1.13/28
> > > e0: 10.2.1.13/24
> > >
> > > There is a tunnel is configured between R3 and
> > R13.
> > >
> > > OSPF is runing between R3 and R5, R5 and R13
> > > EIGRP is running on tunnel and lo0 of R3 and e0 of
> > > R13.
> > > But OSPF works well, but I cann not see tunnel in
> > > routing table and R13 can not see lo0 of R3, R3
> > can
> > > not see e0 of R13.
> > >
> > > Below is their configuation:
> > > ---------------------------------------------
> > > !
> > > version 12.1
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r3
> > > !
> > > enable secret 5 $1$MZ4K$RZXlOUh3c8a5HB.ImaVRl0
> > > !
> > > !
> > > !
> > > !
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > !
> > > cns event-service server
> > > !
> > > !
> > > !
> > > !
> > > interface Loopback0
> > > ip address 129.3.3.3 255.255.255.0
> > > !
> > > interface Loopback1
> > > ip address 10.3.1.3 255.255.255.0
> > > !
> > > interface Tunnel0
> > > ip address 10.4.1.3 255.255.255.0
> > > tunnel source 192.168.4.3
> > > tunnel destination 192.168.1.13
> > > !
> > > interface Ethernet0
> > > ip address 192.168.4.3 255.255.255.0
> > > ip ospf message-digest-key 1 md5 cisco
> > > !
> > > interface Serial0
> > > no ip address
> > > shutdown
> > > no fair-queue
> > > !
> > > interface Serial1
> > > no ip address
> > > shutdown
> > > !
> > > router eigrp 10
> > > network 10.0.0.0
> > > no auto-summary
> > > no eigrp log-neighbor-changes
> > > !
> > > router ospf 1
> > > log-adjacency-changes
> > > area 3 authentication message-digest
> > > network 129.3.3.3 0.0.0.0 area 3
> > > network 192.168.4.3 0.0.0.0 area 3
> > > !
> > > ip classless
> > > no ip http server
> > > !
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > transport input none
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > >
> > > ________________________________________-
> > > version 12.1
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname r13
> > > !
> > > enable secret 5 $1$5fx9$JtLJ8cAJWgL2V9o1/MvOQ1
> > > !
> > > !
> > > !
> > > !
> > > !
> > > ip subnet-zero
> > > no ip domain-lookup
> > > !
> > > cns event-service server
> > > !
> > > interface Loopback0
> > > ip address 129.13.13.13 255.255.255.0
> > > !
> > > interface Tunnel0
> > > ip address 10.4.1.13 255.255.255.0
> > > tunnel source 192.168.1.13
> > > tunnel destination 193.168.4.3
> > > !
> > > interface Ethernet0
> > > ip address 10.2.1.13 255.255.255.0
> > > no keepalive
> > > !
> > > interface Serial0
> > > ip address 192.168.1.13 255.255.255.240
> > > encapsulation frame-relay
> > > ip ospf message-digest-key 1 md5 cisco
> > > ip ospf network broadcast
> > > frame-relay map ip 192.168.1.5 301 broadcast
> > > no frame-relay inverse-arp
> > > !
> > > interface Serial1
> > > no ip address
> > > shutdown
> > > !
> > > router eigrp 10
> > > network 10.0.0.0
> > > no auto-summary
> > > no eigrp log-neighbor-changes
> > > !
> > > router ospf 1
> > > log-adjacency-changes
> > > area 0 authentication message-digest
> > > network 129.13.13.13 0.0.0.0 area 0
> > > network 192.168.1.13 0.0.0.0 area 0
> > > !
> > > ip classless
> > > no ip http server
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > transport input none
> > > line aux 0
> > > line vty 0 4
> > > login
> > > !
> > > end
> > > _______________________________________
> > >
> > >
> > > Does anyone know why?
> > >
> > >
> > > Thanks for help.
> > >
> > >
> > >
> > >
> > >
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Mail Plus - Powerful. Affordable. Sign up
> > now.
> > > http://mailplus.yahoo.com
> >
> >
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3