From: Fred Ingham (fingham@cox.net)
Date: Fri Nov 29 2002 - 15:29:18 GMT-3
Emmanuel: The "out" is correct in filtering the routes from RIP to OSPF.
This is not intuitive until you start to think "out" from RIP "into" OSPF.
Same goes for other protocols.
Cheers, Fred
----- Original Message -----
From: "Emmanuel Guilain" <emmanuel.guilain@cgey.com>
To: "CCIE Lab (E-mail)" <ccielab@groupstudy.com>
Sent: Friday, November 29, 2002 11:52 AM
Subject: Re: Redistribution question (Cisco site)
> ----- Original Message -----
> From: "stefan vogt" <stefan-uwe_vogt@web.de>
>
> > router ospf 109
> > distribute-list 11 out rip
> > access-list 11 permit 130.10.8.0 0.0.7.255
> > access-list 11 deny 0.0.0.0 255.255.255.255
>
> > means permit only route 130.10.8.0 255.255.248.0
> > coming from rip to be redistributed into ospf.
>
> I thought "distribute-list 11 out rip" under "router ospf" filters the
> routes going from OSPF to RIP...
>
> Is that wrong?
>
> router rip
> distribute-list 14 out serial 0
>
> Filters routes going from RIP out to serial 0...
>
> I'm a little lost here.
>
> Emmanuel
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3