From: Szeto Jeff (jytszeto@hotmail.com)
Date: Fri Nov 29 2002 - 06:15:21 GMT-3
Hi Group,
I have tried the feature and use netbios to test.
R1 and R2 are the redundant pair connected with a PC via a switch.
Both router use their loopback as local peer and peer with a remote R3
router, to which has another PC attached.
The question is, if R1 is the master and I shutdown its loopback during a
file transfer between the two PCs, the circuit is broken. No failover occur
R2 will not take up that circuit. I have to reestablish the connection.
Is this normal?
Another question, about the DDR,
Solie suggest use keepalive 0 on the local peer statment and a timeout
value on the remote peer statement.
But the example in
http://www.cisco.com/warp/public/697/dlswdodisdn.html
The two keywords are used in the remote peer statement. Also it include
'dynamic', which Solie said should be used with a matching requirement, like
lsap-output-list...
Could someone help to explain the difference?
Thank you very much.
Jeff
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:12 GMT-3