From: Thomas Trygar (trygar@wans.net)
Date: Wed Nov 27 2002 - 12:44:21 GMT-3
Hello,
Does the 4000M support 16 MB flash? in a single chip?
Do I need a bootrom upgrade? Where do I check hardward required bootroms
and versions?
Is the maximum the 4000M memory can hold 2 4MB flash SIMMs?
The router will boot up in Rxboot with single blank 16 MB Flash SIMM,
but will not see flash.:
4000 Bootstrap Software (XX-RXBOOT), Version 9.14(7), RELEASE SOFTWARE
Patchlevel = 9.1(11)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Wed 18-May-94 05:07 by chansen
cisco 4000 (68030) processor (revision 0xB0) with 32768K/4096K bytes of
memory.
Processor ID 5049852
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
2 Ethernet/IEEE 802.3 interfaces.
2 Token Ring/IEEE 802.5 interfaces.
4 Serial network interfaces.
128K bytes of non-volatile configuration memory.
Press RETURN to get started!
4000(boot)>en
4000(boot)#sh flash
Flash address space not found
4000(boot)#
4000(boot)#sh ver
4000 Bootstrap Software (XX-RXBOOT), Version 9.14(7), RELEASE SOFTWARE
Patchlevel = 9.1(11)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Wed 18-May-94 05:07 by chansen
System Bootstrap, Version 4.14(7), SOFTWARE
4000 uptime is 0 minutes
System restarted by power-on
Running default software
cisco 4000 (68030) processor (revision 0xB0) with 32768K/4096K bytes of
memory.
Processor ID 5049852
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
2 Ethernet/IEEE 802.3 interfaces.
2 Token Ring/IEEE 802.5 interfaces.
4 Serial network interfaces.
128K bytes of non-volatile configuration memory.
Configuration register is 0x2101
4000(boot)#sh flash details
Flash address space not found
4000(boot)#
___________________________________
FYI when trying other flash:
Total 8 MB Flash (2x 4 MB Flash):
4000 Bootstrap Software (XX-RXBOOT), Version 9.14(7), RELEASE SOFTWARE
Patchlevel = 9.1(11)
Copyright (c) 1986-1994 by cisco Systems, Inc.
Compiled Wed 18-May-94 05:07 by chansen
cisco 4000 (68030) processor (revision 0xB0) with 32768K/4096K bytes of
memory.
Processor ID 5049852
DDN X.25 software, Version 2.0, NET2 and BFE compliant.
2 Ethernet/IEEE 802.3 interfaces.
2 Token Ring/IEEE 802.5 interfaces.
4 Serial network interfaces.
128K bytes of non-volatile configuration memory.
8192K bytes of Flash address space sized on CPU board.
Press RETURN to get started!
4000(boot)>
I keep getting the following when I do any configuring:
Address Error, address: 0xf1c at 0x103d05e (PC)
Address Error, address: 0xf1c at 0x103d114 (PC)
Address Error, address: 0xf10 at 0x103d510 (PC)
(router is stable when it just boots up and is in Rxboot)
Or when I can get a 2.3 MB IOS (c4000-i-mz.113-11c.bin) image loaded:
4000(boot)#sh flash
8192K bytes of Flash address space sized on CPU board.
Memory type is Random-Access-Memory.
File name/status
0 c4000-i-mz.113-11c.bin
[6007048/8388608 bytes free/total]
4000(boot)#
I get the following on bootup:
System Bootstrap, Version 4.14(7), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
4000 processor with 32768 Kbytes of main memory
Booting c4000-i-mz.113-11c.bin from Flash address space
rrrrrrrrrrrrrrrrrrrrrrrr
rrrrrrrrrrrr
[OK - 2381496/16101418 bytes]
F3: 9036+2372428+165008 at 0x12000
Error : compressed image checksum is incorrect 0x8BE4B489
Expected a checksum of 0x568B1FB1
Exception: Software forced crash at 0x1214e (PC)
repeats:
System Bootstrap, Version 4.14(7), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
Tom
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:11 GMT-3