From: Neil Moore (neil@droopy.com)
Date: Mon Nov 25 2002 - 17:47:57 GMT-3
Can you post the config?
Also make sure your router-id's match if you are using ospf and bgp
----------------------------------------
Neil Moore CCIE#10044
----- Original Message -----
From: "Rich Doty" <rich_doty@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Monday, November 25, 2002 3:10 PM
Subject: BGP route-reflector client not installing IBGP routes
> I have a route reflector R5, and 2 route reflector clients R3, R6. I'm
> passing IBGP routes, and they are seen by R5/R3 in the BGP table. They
> are, however, not being seen as >, or reachable (and injected into the
> IP routing table). Both the destination prefix and next-hop are listed
> in the IGP routing entries, and the prefixes match. Does anyone have any
> idea why these routes are not being installed?
>
> Thanks,
>
> Rich
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:10 GMT-3