From: Adarsh Singh (adarshs@hclinfinet.net)
Date: Sun Nov 24 2002 - 04:56:01 GMT-3
[ The following text is in the "utf-8" character set. ]
[ Your display is set for the "ISO-8859-1" character set. ]
[ Some characters may be displayed incorrectly. ]
Any one , some ideas pls ?
----- Original Message -----
From: Adarsh Singh <mailto:adarshs@hclinfinet.net>
To: erickbe@yahoo.com ; ccielab@groupstudy.com
Sent: Sunday, November 24, 2002 7:04 AM
Subject: Re: How to change metric on EIGRP with source ip & destination
Hi Erick,
Thanks for the reply on offset it helps , but i am stuck with one issues
i.e i have servers based in HUB , HUB & Spoke are connected through the
Leased line & VSAT , eigrp is running between them .
Now we want to send the traffic from the server1 & server 2 at HUB through
Leased line to spoke , and the rest of the traffic through VSAT , once the
Leased line down , then the traffic for the server 1 & server 2 at HUB
should move to VSAT .
I tried using offset list offset-list 1 out 20000000 Serial0/0, but the
offset command doesnt take extended access-list so with out it i am not
able to send the just the traffic originating from the server1 & server 2 to
the SPOKE through Leased line , any idea on this
Adarsh
----- Original Message -----
From: "Erick B." <erickbe@yahoo.com>
To: "Adarsh Singh" <adarshs@hclinfinet.net>; <ccielab@groupstudy.com>
Sent: Saturday, November 23, 2002 10:31 AM
Subject: Re: How to change metric on EIGRP
> Sure, but he'll only be able to change the distance of
> the selected EIGRP internal route - not external EIGRP
> route. See the recent thread on this.
>
> --- Adarsh Singh <adarshs@hclinfinet.net> wrote:
> > Will distace work if mapped to remote wan ip
> > address on the leased line at
> > HUB.
> >
> > ----- Original Message -----
> > From: "Erick B." <erickbe@yahoo.com>
> > To: "Adarsh Singh" <adarshs@hclinfinet.net>;
> > <ccielab@groupstudy.com>
> > Sent: Friday, November 22, 2002 3:10 PM
> > Subject: Re: How to change metric on EIGRP
> >
> >
> > > offset-list
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3