From: Keyur Shah (kshah@hellocomputers.com)
Date: Fri Nov 22 2002 - 22:02:39 GMT-3
Thompson, It will use both.
[bootrack12@redhat_fremont bootrack12]$ telnet ts12.hellocomputers.com
Trying 192.168.150.12...
Connected to ts12.hellocomputers.com.
Escape character is '^]'.
User Access Verification
Username: kshah
Password:
ts12#
ts12#pix1
Translating "pix1"
Trying pix1 (1.1.1.1, 2013)... Open
User Access Verification
Username: kshah
Password:
pix1(config)# sh fixup
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
pix1(config)# fixup prot ftp 5002
pix1(config)# sh fixup
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
fixup protocol ftp 5002
pix1(config)# fixup protocol ftp 5100-5200
pix1(config)# no fixup protocol ftp 5002
pix1(config)# sh fixup
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
fixup protocol ftp 5100-5200
-Keyur Shah-
CCIE# 4799 (Security;R/S)
CISSP,ccsa,css1,scsa,scna,mcse,mct,mcne,cni
Hello Computers
"Say Hello To Your Future!"
http://www.hellocomputers.com
-----Original Message-----
From: Thompson, Garrett [mailto:gthompson@maximation.com]
Sent: Friday, November 22, 2002 6:58 AM
To: 'ccielab@groupstudy.com'
Subject: PIX question
Can anybody tell me what happens if you issue a fixup protocol ftp command
more than once with different port numbers? Is it supported? Will it only
use the first, or can it do both?
I have both:
fixup protocol ftp 21
fixup protocol ftp 5001
Thanks,
Garrett Thompson
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:09 GMT-3