From: Leo Song (lsong@dataphile.ca)
Date: Fri Nov 22 2002 - 11:51:59 GMT-3
Metric (eigrp) = ( 10000000/minimum bandwidth + total delay ) x 256
Don't touch k1,k2 ,,, k5, you don't need to.
Leo
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sam.MicroGate@usa.telekom.de
Sent: Friday, November 22, 2002 8:41 AM
To: adarshs@hclinfinet.net; ccielab@groupstudy.com
Subject: RE: How to change metric on EIGRP
Router(config-router)#metric weights tos k1 k2 k3 k4 k5
K1 is bandwidth
K2 is load
K3 is reliability
K4 forgot what is it
K5 is mtu
There is a formula to calculate the metric but I do not remember it. You
have to go the Doc CD or Jeff Doyle to find out how to calculate the
metric
from this parameters.
Sam
-----Original Message-----
From: Adarsh Singh [mailto:adarshs@hclinfinet.net]
Sent: Friday, November 22, 2002 3:58 AM
To: ccielab@groupstudy.com
Subject: How to change metric on EIGRP
Hi All,
I have 2 eigrp routes in the router , one through leased line & second
thrrough VSAT.
It is HUB & SPOKE technology , could you tell me how do i set the
metric at
the SPOKE or HUB so that first preffered path is leased line & second
one is
VSAT. How do i change the metric ?
Rgds
Adarsh Singh
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:08 GMT-3