From: Sam.MicroGate@usa.telekom.de
Date: Fri Nov 22 2002 - 11:53:57 GMT-3
Leo,
You just touched them in your formula. The minimum bandwidth and the total
delay are K1 and K2. How come you advice not to touch them while you are
using them your self?
Sam
-----Original Message-----
From: Leo Song [mailto:lsong@dataphile.ca]
Sent: Friday, November 22, 2002 9:52 AM
To: Sam.MicroGate@usa.telekom.de; adarshs@hclinfinet.net;
ccielab@groupstudy.com
Subject: RE: How to change metric on EIGRP
Metric (eigrp) = ( 10000000/minimum bandwidth + total delay ) x 256
Don't touch k1,k2 ,,, k5, you don't need to.
Leo
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Sam.MicroGate@usa.telekom.de
Sent: Friday, November 22, 2002 8:41 AM
To: adarshs@hclinfinet.net; ccielab@groupstudy.com
Subject: RE: How to change metric on EIGRP
Router(config-router)#metric weights tos k1 k2 k3 k4 k5
K1 is bandwidth
K2 is load
K3 is reliability
K4 forgot what is it
K5 is mtu
There is a formula to calculate the metric but I do not remember it. You
have to go the Doc CD or Jeff Doyle to find out how to calculate the metric
from this parameters.
Sam
-----Original Message-----
From: Adarsh Singh [mailto:adarshs@hclinfinet.net]
Sent: Friday, November 22, 2002 3:58 AM
To: ccielab@groupstudy.com
Subject: How to change metric on EIGRP
Hi All,
I have 2 eigrp routes in the router , one through leased line & second
thrrough VSAT.
It is HUB & SPOKE technology , could you tell me how do i set the metric at
the SPOKE or HUB so that first preffered path is leased line & second one is
VSAT. How do i change the metric ?
Rgds
Adarsh Singh
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:08 GMT-3