From: MADMAN (dave@interprise.com)
Date: Thu Nov 21 2002 - 11:54:48 GMT-3
Yes I know but EIGRP also supports 0.0.0.0 which I generally prefer,
IGRP does not.
Dave
Joe A wrote:
>
> Dave,
>
> It states right in this link you forwarded to use it with both IGRP and
> EIGRP.
>
> Joe
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> MADMAN
> Sent: Wednesday, November 20, 2002 5:51 PM
> To: Peter Wodle
> Cc: ccielab@groupstudy.com
> Subject: Re: IP default-netwrok command
>
> Peter Wodle wrote:
> >
> > Can someone please set me straight on "IP default-netwrok".
> >
> > Is this command only useable in IGRP & EIGRP or can you deploy it in
> > other routing protocols (e.g. OSPF & RIP)?
>
> I have only used it with IGRP, EIGRP understands 0.0.0.0,
>
> http://www.cisco.com/en/US/customer/tech/tk648/tk365/technologies_tech_n
> ote09186a0080094374.shtml
> Dave
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "You don't make the poor richer by making the rich poorer." --Winston
> Churchill
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:08 GMT-3