From: Erick B. (erickbe@yahoo.com)
Date: Tue Nov 19 2002 - 02:51:04 GMT-3
To adjust a single external EIGRP route, look at the
offset-list command. This doesn't effect the AD but
adjusts the metric so other routes could be preferred
depending on what you're trying to do. I've done this
before for customers.
Erick
--- Robert Massiache <robert2140@hotmail.com> wrote:
> You don't even need the rotue-map. I used it for
> OSPF so I thought there
> would be a similar way for EIGRP too.
>
> R4(config-router)#distance eigrp ?
> <1-255> Distance for internal routes
> R4(config-router)#distance eigrp 100 ?
> <1-255> Distance for external routes
> R4(config-router)#distance eigrp 100 200 ?
> <cr>
> R4(config-router)#distance eigrp 100 200
>
>
> thanks
> Robert M
>
> >From: "Donny MATEO"
> <donny.mateo@sg.ca-indosuez.com>
> >Reply-To: "Donny MATEO"
> <donny.mateo@sg.ca-indosuez.com>
> >To: "Robert Massiache" <robert2140@hotmail.com>
> >CC: ccielab@groupstudy.com
> >Subject: Re: How to change distance for some ex
> eigrp route
> >Date: Tue, 19 Nov 2002 11:26:06 +0800
> >
> >Can't seems to find the command for that one under
> router eigrp.
> >What IOS version are you using ?
> >
> >
> >
> >
> > "Robert
> > Massiache" To:
>
> >guoqicui@yahoo.com, ccielab@groupstudy.com
> > <robert2140@hotma cc:
> > il.com>
> Subject: Re: How to change
> >distance for some ex eigrp route
> > Sent by:
> > nobody@groupstudy
> > .com
> >
> >
> > 19-11-2002 10:43
> > Please respond to
> > "Robert
> > Massiache"
> >
> >
> >
> >
> >
> >
> >use the route-map instead. You got the option of
> matching external routes
> >alone. ITs avalable for bgp, ospf and as well as
> eigrp.
> >
> >Just call the route-map from the distance command.
> I never tried for eigrp
> >but I know it works fine for OSPF E2 routes.
> >
> >thanks
> >
> >
> >
> >
> >
> > >From: Guoqi Cui <guoqicui@yahoo.com>
> > >Reply-To: Guoqi Cui <guoqicui@yahoo.com>
> > >To: ccielab@groupstudy.com
> > >Subject: How to change distance for some ex eigrp
> route
> > >Date: Mon, 18 Nov 2002 16:44:31 -0800 (PST)
> > >
> > >Hi, group:
> > >Is there a way to change the adminstrative
> distance
> > >of some selected "EX D" eigrp routes.
> > >
> > >I tried:
> > >distance 100 x.x.x.x y.y.y.y acc-num
> > >
> > >This command only change the distance of routes
> with
> > >tag "D". There is no effect for "D Ex" routes.
> > >
> > >distance eigrp 100 100
> > >
> > >will change the distance of all routes.
> > >
> > >what I need is a way to change only the distance
> of a
> > >selected routes.
> > >
> > >Thank you.
> > >
> > >Guoqi
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:06 GMT-3